jtcomstock
asked on
Cannot find domain when joining Windows Multipoint server to domain
I am setting up a new server with Hyper-V. The server has two VMs:
VM1 - Server 2012 Essentials
VM2 - Windows Multipoint Server 2012
I am trying to join the WMS machine to the domain via control panel/system and get the error the domain cannot be found. I can ping, UNC and get to the connect page via the host name, but cannot join the domain.
VM2 has a static IP address and gets DNS from VM1.
Could use some advice on how to get WMS to see the DC.
Jason
VM1 - Server 2012 Essentials
VM2 - Windows Multipoint Server 2012
I am trying to join the WMS machine to the domain via control panel/system and get the error the domain cannot be found. I can ping, UNC and get to the connect page via the host name, but cannot join the domain.
VM2 has a static IP address and gets DNS from VM1.
Could use some advice on how to get WMS to see the DC.
Jason
Can you ping the FQDN of the domain itself (ie. ping domainname.local) and have it return the IP address of the VM running Essentials? If not I would look to DNS.
ASKER
Yes. I get the IPV4 address of both VM2 on one another and from my laptop plugged into the network.
I built up new VMs for the two machines, in case something was not right with the first DC on the system.
I built up new VMs for the two machines, in case something was not right with the first DC on the system.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Issue was resolved by outside party.