Solved

Network Load Balancing

Posted on 2013-11-17
4
447 Views
Last Modified: 2013-11-23
Hi

We am configuring a router for a client : Netgear FVS336GV2

Having some issues with load balancing,
There are 2 WAN connections to the router,
Setup the necessary port bindings and port forwarding

The Issues:
Remote users connecting to the network via Remote Desktop, Exchange, or VPN keep being disconnected

something is not right? any ideas?

Thanks
0
Comment
Question by:Paul-Anthony
  • 2
4 Comments
 
LVL 26

Expert Comment

by:Soulja
ID: 39654509
Insure you don't have any asymmetric routing taking place. Inbound traffic could be going into one wan interface and being routed back out the other.
0
 
LVL 4

Expert Comment

by:askincakir
ID: 39655759
Hi,
Please check can you ping between end points.
If you can ping but cannot do the remote desktop it may be a MTU issue. Usually faced with WAN side.

Br,
0
 

Accepted Solution

by:
Paul-Anthony earned 0 total points
ID: 39658517
Thanks Guys for your assistance
I contacted Netgear support, they recommended upgrading to the latest firmware which seems to have fixed  the problems,
0
 

Author Closing Comment

by:Paul-Anthony
ID: 39671158
Problem fixed by contacting Netgear business support who were very help in resolving the issue
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Most of the applications these days are on Cloud. Cloud is ubiquitous with many service providers in the market. Since it has many benefits such as cost reduction, software updates, remote access, disaster recovery and much more.
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

765 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question