Solved

Wake on Lan issue on HP Proliant Server

Posted on 2013-11-17
6
3,058 Views
Last Modified: 2014-06-28
WOL is already enabled on the HP Proliant ML110 G7 Server, the issue is that it only works one time after removing the power cord.  After shutting down the server, the WOL will never work unless removing the power cord again.  

There is a alert prompted on the BIOS when enabling the WOL (details as below), but I've tried to remove anything except the network line and power supply.

"When enabling Wake-On LAN, be sure to remove all power cords before adding
or removing any adapters. Some adapters cause the system to power on when they are added or removed."

I appreciate any help from any experts here!
0
Comment
Question by:royfok
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
6 Comments
 
LVL 55

Expert Comment

by:andyalder
ID: 39656124
Can you wake it up using the iLO3 virtual power button?
0
 

Author Comment

by:royfok
ID: 39658173
Thanks!  Joensw, I'll try the solution later tonight, as I remember it is set as off for the option.
Hi, andyalder, I'ven't tried the iLO3, but I'll try the solution from joensw first then iLO3.

I'll revert later, Thank you very much!
0
 

Author Comment

by:royfok
ID: 39658503
Hi joensw, The version of the BIOS is a bit different from the solution in the link, but I've enabled   the Automatic Power-On option (there are only two options for Enabled and Disabled), still no luck.
Hi andyalder, I can connect to the iLO, but the button is not responding.
0
 
LVL 55

Accepted Solution

by:
andyalder earned 500 total points
ID: 39658561
Try iLO with WoL disabled.
0
 

Author Comment

by:royfok
ID: 39694366
Sorry for the delay, after some attempts, the iLO can wake the server up and is an alternative solutions for me.
0

Featured Post

Free eBook: Backup on AWS

Everything you need to know about backup and disaster recovery with AWS, for FREE!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
RAID 5 - 4x drives. 1x drive failed. Another classed as missing !??! 16 60
Type HP Proliant DL380 G7 10 85
Connecting APC UPS 2200 via serial port 3 223
Radius Debug Error 16 112
More or less everybody in the IT market understands the basics of Networking, however when we start talking about Storage Networks, things get a bit dizzier, and this is where I would like to help.
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
Although Jacob Bernoulli (1654-1705) has been credited as the creator of "Binomial Distribution Table", Gottfried Leibniz (1646-1716) did his dissertation on the subject in 1666; Leibniz you may recall is the co-inventor of "Calculus" and beat Isaac…
Nobody understands Phishing better than an anti-spam company. That’s why we are providing Phishing Awareness Training to our customers. According to a report by Verizon, only 3% of targeted users report malicious emails to management. With compan…

735 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question