Solved

Cisco 2504 WLC Help

Posted on 2013-11-20
1
1,495 Views
Last Modified: 2014-01-08
Hi,

Finally managed to get a budget to replace the old Netgear "cough" wireless network.

I have purchased 1 x Cisco 2504 WLC and 6 x AIR-CAP3602I-E-K9  

Updated the WLC to the following :-

Software Version 7.4.110.0
Field Recovery Image Version 7.4.1.30

And the Ap to :-

Software Version 7.4.110.0

Connected port 1 & 2 to a 3750X Stack and enabled Port-Channel and LAG
on the switch and WLC.

However


the access points are listed under the 802.11a/n Radios and the 802.11b/g/n Radios
but nothing is listed under Dual-Band Radios


Have I done something incorrectly ?

Any help or setup guidance appricated.

Thank you in advance.
0
Comment
Question by:Mongo Peck
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 46

Accepted Solution

by:
Craig Beck earned 500 total points
ID: 39664503
No, that's actually correct.

The 3602 has two separate radios - a 2.4GHz radio and a 5GHz radio.  It's a bit confusing, I know, but that doesn't make the 'radio' dual-band.  That makes the 'AP' dual-band.

A dual-band 'radio' is an individual radio module which serves both frequencies using the same hardware.  Typically this will be the 802.11ac module in your case.

If you add an 802.11ac module to the 3600 AP you'll need to run v7.5 code.
0

Featured Post

Now Available: Firebox Cloud for AWS and FireboxV

Firebox Cloud brings the protection of WatchGuard’s leading Firebox UTM appliances to public cloud environments. It enables organizations to extend their security perimeter to protect business-critical assets in Amazon Web Services (AWS).

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
How to make my old USB printer wireless? 71 257
Home wireless security 10 66
Router Question 12 73
Cisco Wireless Access Controller 3 35
This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
DECT technology has become a popular standard for wireless voice communication. DECT devices are not likely to be affected by other electronic devices and signals because they operate in a separate frequency-band.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question