Solved

Network Card Changes Protocol Access

Posted on 2013-11-22
3
234 Views
Last Modified: 2013-12-05
I originally posted this under Voip then I realised changing the network card fixed my voip problem, so...basically it seems when I have a LAN cable stuck in the back the RTP (of the voip call) flows lovely, but when I switch to a wireless dongle, whilst it seems to be generally working, accessing the web, etc, the RTP is not getting thru to the softphone, although it is showing in Wireshark.
0
Comment
Question by:Silas2
  • 2
3 Comments
 
LVL 8

Accepted Solution

by:
gpizzuto earned 250 total points
ID: 39668818
Could be some ports blocked ?
0
 

Author Comment

by:Silas2
ID: 39668967
I'm just looking at the router and it has two entries for the same pc, one for each network card, not that surprising I guess but could that affect it?
0
 

Author Comment

by:Silas2
ID: 39669109
Re ports blocked, would the port be closed by changing from the LAN card to a wireless dongle?
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question