Solved

Port Forwarding With Multiple Network Cards

Posted on 2013-11-22
1
316 Views
Last Modified: 2013-11-29
I'm just trying to setup a mailserver and the PC i want to host it has had both a wireless network and an Ethernet cable network card in, so in the ISP router's setup screen I'm getting two entries for the same PC (although I'm only using one at a time).
Does that mean I have to switch the port forwarding if I switch network cards?
0
Comment
Question by:Silas2
1 Comment
 
LVL 43

Accepted Solution

by:
Steve Knight earned 250 total points
ID: 39670963
You would have to point at whatever gets to the server... presumably you have a fixed IP address on the wired card, and presumably would be using that right?

If you decide to use wireless for whatever reason - I presume this is for a home setup? - then put the same fixed IP on the wireless card and no need to amedn the router.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

914 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

22 Experts available now in Live!

Get 1:1 Help Now