Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

ASUS router settings

Posted on 2013-11-27
4
Medium Priority
?
386 Views
Last Modified: 2013-11-28
Dear experts,

I have an ordinary router ASUS RT-15 and .I need a little help.
My ISP gives me one real IP. So I want 1 port – for example 60000 to go to 192.168.0.50, all others ports to go to 192.168.0.60. How can I solve this with ASUS router?
Is it possible to set DMZ to 192.168.0.60 and virtual server for port 60000 to 192.168.50 ? This should work, or DMZ by default turn off Virtual servers? If this will not work, what others options I have?
0
Comment
Question by:dvplayltd
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 36

Expert Comment

by:Kimputer
ID: 39683446
Ideally, you could set up DMZ to .60 and one port for .50.
However I think in this case, that one port will still go to .60, as DMZ is probably first on the list.
So the last solution is as follows (as I think your router supports port ranges):
0-59999 to .60
60000 to .50
60001-65535 to .60
0
 

Author Comment

by:dvplayltd
ID: 39683564
To Kimputer

I think the same as you-DMZ is with priority. Or there is change to be 100 % like I need? Bad is that I'm not so easy to test it until I'm far from server, i need to know in advance ...  In a ASUS manual for such routers is written that my router support port range -i do it. Please look the picture

 But I need if port 25 come to real IP it to be transfered to port 25 on 192.168.0.100, not like port 1. How will work in this case the router? I think it will change the port number from 25 to 1 ..
Router.jpg
0
 
LVL 36

Accepted Solution

by:
Kimputer earned 2000 total points
ID: 39683582
Port range 1:5000 to port 1 is correct. It means, 1 goes to 1, 2 goes to 2, etc all the way up to 5000 mapping to 5000.
It's also easy to test. Just use filezilla server, and have some remote computer ftp to you. Just change the FTP listening port a few times, and let the other side ftp to that port.
0
 

Author Closing Comment

by:dvplayltd
ID: 39683639
10x
0

Featured Post

Learn how to optimize MySQL for your business need

With the increasing importance of apps & networks in both business & personal interconnections, perfor. has become one of the key metrics of successful communication. This ebook is a hands-on business-case-driven guide to understanding MySQL query parameter tuning & database perf

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

670 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question