Solved

Windows Server 2012 taking to long to load into windows

Posted on 2013-11-28
3
191 Views
Last Modified: 2016-11-23
I recently purchased a new Dell Server with Windows Server 2012. I setup active directory, DHCP, DNS, and File Server roles including windows updates. Now when the server restarts in takes 15-20 minutes to boot into windows and says Please Wait for a long time. The reboot process is normal but the loading into windows isn't. Any ideas of what might be causing this issue?

Thanks
0
Comment
Question by:csciarro
  • 2
3 Comments
 
LVL 17

Expert Comment

by:Chris Millard
ID: 39683672
Have you disabled IPv6 by any chance? That happened to me before with Server 2008.

Have you installed any AntiVirus software? Also is there anything in the application or system event logs to indicate a problem?
0
 

Author Comment

by:csciarro
ID: 39683691
I'm still waiting for the server to boot into windows. I haven't disabled the IPv6 but will try that and will check the logs. The anti-virus I installed is Kaspersky so would that cause the issue?
0
 
LVL 17

Accepted Solution

by:
Chris Millard earned 500 total points
ID: 39683698
Kaspersky could well cause issues. I would try removing it and trying again to see...
0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Understanding the various editions available is vital when you decide to purchase Windows Server 2012. You need to have a basic understanding of the features and limitations in each edition in order to make a well-informed decision that best suits y…
A procedure for exporting installed hotfix details of remote computers using powershell
This tutorial will walk an individual through the process of configuring basic necessities in order to use the 2010 version of Data Protection Manager. These include storage, agents, and protection jobs. Launch Data Protection Manager from the deskt…
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…

803 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question