Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

setting up a verizon actiontec wireless router on a cisco 3825 router or 3550 switch

Posted on 2013-11-28
5
Medium Priority
?
832 Views
Last Modified: 2013-12-08
Hello I have a cisco 3825 router and a cisco 3550 switch that is configure with vlans and I wanted to know how could I connect my verizon actiontec fios wireless N router to handout dhcp and a separate wireless network for guest etc.
0
Comment
Question by:James B
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 12

Expert Comment

by:Infamus
ID: 39684727
It depends on if fios wireless router is able to tag vlans and also able to support muliple SSID's.  

Otherwise, you will need seperate wireless router connected to guest VLAN (you need to create another VLAN for the guests) and assign default route to fios router.
0
 

Author Comment

by:James B
ID: 39690212
ok, I see that it can tag vlans and it will only support just 1 ssid which is all that matters to me. My other question is that it is coax tied to the television and I would like to be able to keep the tv. can this be accomplished? or would I need to have it converted from coax to ethernet? or be able to use both?
0
 
LVL 12

Expert Comment

by:Infamus
ID: 39690248
There should be ethernet ports behind the wireless router.

All you have to do is connect one of the ethernet ports to your switch using a patch cable.

If you need setup seperate wireless access for the guest, you need multi-SSID device.
0
 

Author Comment

by:James B
ID: 39699447
ok here is my setup on the 3550 switch:

vlan 20
name - guest wireless

vlan 25
name- users

I am using router on a stick and wanted to know could I use the verizon actiontec to give out LAN DHCP? and would it be able to issue give out ip addresses to those who access the guest wireless?

I want to make sure so that I don't configure DHCP from my cisco 3825.
0
 
LVL 12

Accepted Solution

by:
Infamus earned 600 total points
ID: 39699505
I'm not sure how your wireless router will determine which IP to give out, guest vlan IP or users vlan IP if you are only using one SSID.  Normally, you create two SSID, one for users and one for guest, hen you assign DHCP scope per SSID.

If your wireless only support one SSID, my suggestion was to buy one more wireless router and plug it into guest VLAN on the switch and have the guest connect to the new router.
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

For Sennheiser, comfort, quality and security are high priority areas. This paper addresses the security of Bluetooth technology and the supplementary security that Sennheiser’s Contact Center and Office (CC&O) headsets provide.  
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

664 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question