Solved

Cisco QoS Policy Map Question

Posted on 2013-11-28
2
274 Views
Last Modified: 2013-11-29
Hello Experts

Our ISP, (BT) have applied the following policy map to their WAN interface:

!        
policy-map Parent-Shaper
 description 20000K CDR
 class class-default
  shape average 18400000 73600 0
!
!

Can someone please explain what the policy map is achieving?

Cheers

Carlton
0
Comment
Question by:cpatte7372
2 Comments
 
LVL 12

Accepted Solution

by:
Infamus earned 500 total points
Comment Utility
Try "show policy interface <WAN Interface>"

It will describe itself.

Basically  the traffic that does not fall into one of the defined classes is configured to shape traffic to 17.5 Mb, with a normal burst size of 73600 bits
0
 

Author Closing Comment

by:cpatte7372
Comment Utility
Cheers
0

Featured Post

Top 6 Sources for Identifying Threat Actor TTPs

Understanding your enemy is essential. These six sources will help you identify the most popular threat actor tactics, techniques, and procedures (TTPs).

Join & Write a Comment

Suggested Solutions

Title # Comments Views Activity
Traffic monitoring on Tunnel 7 67
Asymmetric Routing (Firewall) 3 59
Systems talking to each other 5 107
solarwind tftp server 2 30
New Server 172.16.200.2  was moved from behind Router R2 f0/1 to behind router R1 int f/01 and has now address 172.16.100.2. But we want users still to be able to connected to it by old IP. How to do it ? We can used destination NAT (DNAT).  In DNAT…
We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

8 Experts available now in Live!

Get 1:1 Help Now