Solved

Symantec Backup Exec 2010 R3 wants Netbios installed on my SBS 2011 server

Posted on 2013-12-03
4
532 Views
Last Modified: 2013-12-04
BEWS says during the pre-installation check that NetBIOS over TCPIP should be installed.
I look into the properties of my NIC but see no option to install this.
Suggestions welcome
0
Comment
Question by:JPD153
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 6

Expert Comment

by:donnk
ID: 39694755
USe the built in backup its better, simpler and cheaper!
0
 

Author Comment

by:JPD153
ID: 39695256
Does not backup to tape and I am backing up several servers from the same place. NT backup does NOT do that
0
 
LVL 6

Accepted Solution

by:
donnk earned 500 total points
ID: 39695266
fair enough, cant imagine how long a full server backup takes on tape!

The vid below shows how enable netbios over tcpip of server 08 R2 which is SBS.

https://www.youtube.com/watch?v=dWiWxZEOqtw
0
 

Author Comment

by:JPD153
ID: 39695440
Actually with an LTO4 it is not that bad - 5 to 6 hours for 5 servers including the SBS.
Thanks for the video, just what I needed.
0

Featured Post

Get 15 Days FREE Full-Featured Trial

Benefit from a mission critical IT monitoring with Monitis Premium or get it FREE for your entry level monitoring needs.
-Over 200,000 users
-More than 300,000 websites monitored
-Used in 197 countries
-Recommended by 98% of users

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to update Firmware and Bios in Dell Equalogic PS6000 Arrays and Hard Disks firmware update.
The Delta outage: 650 cancelled flights, more than 1200 delayed flights, thousands of frustrated customers, tens of millions of dollars in damages – plus untold reputational damage to one of the world’s most trusted airlines. All due to a catastroph…
This tutorial will walk an individual through locating and launching the BEUtility application to properly change the service account username and\or password in situation where it may be necessary or where the password has been inadvertently change…
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…

630 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question