Solved

Lab to improve my understanding of the Cisco routing table on a medium size network.

Posted on 2013-12-04
3
322 Views
Last Modified: 2014-02-24
My routing skills need improvement and I’d like a lab, GNS3 perfered, that would give me a better understanding of reading routing tables and understanding the topology of a network.

Thank you,
Dave
0
Comment
Question by:dsterling
  • 2
3 Comments
 
LVL 35

Accepted Solution

by:
Ernie Beek earned 500 total points
ID: 39697692
0
 

Author Comment

by:dsterling
ID: 39698514
erniebeek, thanks for the info, but I'm looking for something more specific, what I want to do is create a network topology diagram according to the routing tables and if there is a lab specific for that.

If I go on to a network and there are not diagram/s of the network then I would like to look at the config files, specifically the routing table and make the diagram of the network to use as reference.
0
 

Author Closing Comment

by:dsterling
ID: 39884584
Not as specific as what I was looking for, but still helpful.
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Suggested Solutions

Title # Comments Views Activity
Cisco ACS mixed versions 8 53
EIGRP  router failure 14 28
How to use a IP block on cisco 877 3 26
iPad Won't Connect 16 34
New Server 172.16.200.2  was moved from behind Router R2 f0/1 to behind router R1 int f/01 and has now address 172.16.100.2. But we want users still to be able to connected to it by old IP. How to do it ? We can used destination NAT (DNAT).  In DNAT…
Shadow IT is coming out of the shadows as more businesses are choosing cloud-based applications. It is now a multi-cloud world for most organizations. Simultaneously, most businesses have yet to consolidate with one cloud provider or define an offic…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

708 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now