Solved

Need help configuring Motorola Wireless Access Point AP 6532

Posted on 2013-12-04
2
7,445 Views
Last Modified: 2013-12-26
A customer was very specific in requesting expensive Motorola wireless access points - the AP 6532 model, to be exact. It seems that despite the instructions that indicate an HTML interface, there is only SSH access and I've not been successful locating any documentation on the command line interface commands. I've also come across some posts indicating a separate "controller" might be necessary to use these things.

Thanks in advance for lending your help and experience!

Joe
0
Comment
Question by:dekroon
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 15

Accepted Solution

by:
getzjd earned 500 total points
ID: 39739656
These AP's are be configurable with or without a controller.  See page 21 http://www.slideshare.net/advantec_italia/motorola-solutions-ap6532-access-point-installation-guide-part-no-72-e-14936801-rev-b-13903856# 

Has the initial setup wizard been run before?  I suggest resetting the AP to factory default   http://community.spiceworks.com/topic/197831-how-do-you-reset-a-motorola-ap-6521-to-factory-defaults 
 
What version of browser are you using?    What version of firmware (WiNG) on the AP?

Attached are screenshots of one of my ap6532 GUI interfaces and we can control it either through the controller or AP.
6532.JPG
6532a.JPG
0
 

Author Closing Comment

by:dekroon
ID: 39740178
Thanks, getzjd.

I had not previously been able to find instructions for resetting the AP to factory default. So thanks for those. I will try Reset and FactoryDefault for user name and password. Hopefully that enables the html GUI.

Joe
0

Featured Post

Simple, centralized multimedia control

Watch and learn to see how ATEN provided an easy and effective way for three jointly-owned pubs to control the 60 televisions located across their three venues utilizing the ATEN Control System, Modular Matrix Switch and HDBaseT extenders.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hopefully this article will help someone who's had the same issues I had. I have a Dell Wireless 1390 WLAN Mini-Card and Windows 7, and for the past couple of days I was beyond frustrated because my wireless laptop was not able to access the Inte…
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

728 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question