?
Solved

LAN Controller

Posted on 2013-12-06
6
Medium Priority
?
274 Views
Last Modified: 2013-12-12
Is there anyway of a quick fix or repair of a Cisco LAN Controller 2100 or 4400 or maybe others for that matter, that has an orange status light, and connected be access through the console ?
0
Comment
Question by:discoveranother
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 3
6 Comments
 
LVL 46

Expert Comment

by:Craig Beck
ID: 39700845
What do you see when you console to the WLC?
0
 
LVL 1

Author Comment

by:discoveranother
ID: 39701060
Unable to console to it !
0
 
LVL 46

Expert Comment

by:Craig Beck
ID: 39701262
Physically unable to attach to the console, or when you do console there's no output?

If there's just no output, can you verify that the console is actually working by connecting to different device?
0
Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

 
LVL 1

Author Comment

by:discoveranother
ID: 39702287
tried connecting to controller via hyperterminal via console cable but nothing appearing on screen !
0
 
LVL 46

Accepted Solution

by:
Craig Beck earned 2000 total points
ID: 39702323
Ok, but have you verified that the serial connection works with another device?  Do you have a switch you can console to just to test?

It could just be a PSU issue.  If it's a 2100 series WLC you can get a new PSU off Ebay for next to nothing to try it.

If the WLC really is 'dead' there's not much you can do apart from RMA it if you have a service contract on it.  I'd doubt you'd get a replacement for it though if it's a 2100 or 4400 series WLC.
0
 
LVL 1

Author Comment

by:discoveranother
ID: 39715232
Fair point could be PSU but likely faulty.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Enterprise networks where VoIP phones have been deployed frequently use port configurations that allow both a computer and an IP phone to be plugged into the same switch port but use different VLANs. On Cisco equipment I'm referring to the "native V…
This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
How to fix incompatible JVM issue while installing Eclipse While installing Eclipse in windows, got one error like above and unable to proceed with the installation. This video describes how to successfully install Eclipse. How to solve incompa…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question