Solved

Question about Partitions in Cisco Flash

Posted on 2013-12-09
1
178 Views
Last Modified: 2013-12-16
I have a few questions regarding partitions in Cisco Flash

1.) When are they helpful?
2.) How can I remove a partition?
3.) If a Cisco device has the following partitions...

16384K bytes of processor board System flash partition 1 (Read/Write)
16384K bytes of processor board System flash partition 2 (Read/Write)

... and an IOS requires 20 KB of memory, will that IOS use space from both partitions?

Thanks
0
Comment
Question by:meade470
1 Comment
 
LVL 10

Accepted Solution

by:
koudry earned 500 total points
ID: 39707438
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question