Solved

SCCM 2012 R2 - Failed to Verify Hash

Posted on 2013-12-09
9
2,067 Views
Last Modified: 2013-12-16
Hi there,

I'm setting up a SCCM 2012 R2 lab with the following:

Windows Server 2012 R2 Hyper-V
All VM's running Windows Server 2012 R2
SCCM 2012 R2 installed on 2 VM's (One Management Point, One Distribution Point)
Source files are hosted on the Management Point on a Share called SOURCE

I've been able to deploy OS images, Software updates, and Packages. I'm now deployig my first Application, Microsoft Office 2013 64 Bit.

Now, I'm getting a "Package Transfer Manager has failed to verify hash for package XXXX on Distribtion Point."

Researching for solutions, I have done the following:

Checked for hidden files in the source directory (None were found)
Re-applied permissions (ALL SCCM servers have Full rights to SOURCE, as well as being Local Administrators)
Checked Network Service Account (Is local Administrator on all SCCM servers; has full permissions to SOURCE)
Checked all Roles and Features are installed

I'm truly stuck with this. Any ideas on how I can proceed? Also, are there any log files I should look through?
0
Comment
Question by:managedsol
  • 5
  • 3
9 Comments
 
LVL 31

Expert Comment

by:merowinger
ID: 39707875
Yes please first check out the distmgr.log file on the DP Server
0
 
LVL 23

Expert Comment

by:Nagendra Pratap Singh
ID: 39707891
Refresh the package and check.
0
 

Author Comment

by:managedsol
ID: 39710562
Hi there,

I've uploaded the log files to the following location: Log Files

The package is DMO0001F
0
Use Case: Protecting a Hybrid Cloud Infrastructure

Microsoft Azure is rapidly becoming the norm in dynamic IT environments. This document describes the challenges that organizations face when protecting data in a hybrid cloud IT environment and presents a use case to demonstrate how Acronis Backup protects all data.

 

Author Comment

by:managedsol
ID: 39710580
@npsingh123 - I've refreshed the package with no success.
0
 
LVL 31

Expert Comment

by:merowinger
ID: 39710614
Can you please post it direclty on EE?
0
 

Author Comment

by:managedsol
ID: 39710617
No worries. I've also added the Package Log file, as there is mention of the hash error in it
distmgr.log
PkgXferMgr.log
0
 
LVL 31

Expert Comment

by:merowinger
ID: 39711089
First check out this:
http://social.technet.microsoft.com/Forums/en-US/87f95b0f-9a58-46b2-a51c-44352998db08/package-not-distributed-to-dp-on-windows-server-2003-configmgr-2012?forum=configmanagerdeployment

Re-check that the Site Server Computer Account is in the local Admins of the DP.
Also check out the last part in this document. Maybe a Folder or file is not allowed via IIS.
http://technet.microsoft.com/de-de/library/cc431377.aspx

If nothing helps i would remove that package from SCCM wait until it's gone from all DPs and re-add it.
0
 

Accepted Solution

by:
managedsol earned 0 total points
ID: 39712879
Hi there,

I've checked the permissions and local admin accounts. No issues there.

Checked the permissions in IIS as suggested. No issues there.

Checked out the first link. Checked and all required roles and features (RDC, BITs, etc) are installed on the MP and DP servers.


I was able to resolve the issue by removing all permissions from the SOURCE drive/Shares as well as the DP Shares, and recreating them, ensuring correct inheritance is applied.

This was done using the icacls command line tool.

I did end up removing the package and recreating as well. This action was performed twice prior to posting this support ticket.

So in summary, the issue was a corrupt permission on either the DP or Source directories.
0
 

Author Closing Comment

by:managedsol
ID: 39721069
The solution was found after trial and error.

Use of the icacls command was invaluable in resolving this issue.

Windows was reporting that the permissions were correct, but resetting everything back to square one did the trick.
0

Featured Post

Announcing the Most Valuable Experts of 2016

MVEs are more concerned with the satisfaction of those they help than with the considerable points they can earn. They are the types of people you feel privileged to call colleagues. Join us in honoring this amazing group of Experts.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

1. Boot PC and press F10, select storage options and change the compatibility from “AHCI” to “IDE”, save and exit 2. Boot PC and press F12 3. Upon PXE display of searching for DHCP server, press Pause break to obtain MAC address 3. Open Configu…
Welcome to my series of short tips on migrations. Whilst based on Microsoft migrations the same principles can be applied to any type of migration. My first tip Migration Tip #1 – Source Server Health can be found listed in my profile here: http:…
This tutorial gives a high-level tour of the interface of Marketo (a marketing automation tool to help businesses track and engage prospective customers and drive them to purchase). You will see the main areas including Marketing Activities, Design …
This Micro Tutorial demonstrates using Microsoft Excel pivot tables, how to reverse engineer competitors' marketing strategies through backlinks.

816 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

8 Experts available now in Live!

Get 1:1 Help Now