Solved

nanostation2

Posted on 2013-12-09
3
196 Views
Last Modified: 2013-12-10
Do I have to make changes to my router to setup the nanostation2?
0
Comment
Question by:dskemp
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 

Author Comment

by:dskemp
ID: 39707534
I have a home network with a cisco router connected to a 12 port switch.  I have Ethernet ports in several rooms in my house.  The ip for the nanostation is supposed to be 192.168.1.120, however I cant seem to access it.
0
 
LVL 24

Accepted Solution

by:
smckeown777 earned 500 total points
ID: 39708525
What ip address is assigned to your pc/laptop? If its not in the 192.168.1.x network then yes you will need to set a static ip on the pc/laptop to 192.168.1.10 or something and then you should be able to connect

Possibly you also need to connect directly to the nanostation - i.e. laptop - network cable - nanostation(also with the static ip address)
0
 

Author Closing Comment

by:dskemp
ID: 39708768
That seemed to fix the problem.
Thank you!!
0

Featured Post

Don't Cry: How Liquid Web is Ensuring Security

WannaCry is just the start. Read how Liquid Web is protecting itself and its customers against new threats.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

David Varnum recently wrote up his impressions of PRTG, based on a presentation by my colleague Christian at Tech Field Day at VMworld in Barcelona. Thanks David, for your detailed and honest evaluation!
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …
Suggested Courses
Course of the Month6 days, 5 hours left to enroll

627 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question