?
Solved

Cisco PIX 515 PDM Web Access

Posted on 2013-12-15
2
Medium Priority
?
624 Views
Last Modified: 2013-12-20
Hey gurus, just got to a new customers site and behold.  I find a Cisco Pix 515.  They contracted me to make some changes to their config.  However when I try to launch the web PDM I get nothing.  Can anyone assist?

Thanks

Manny Lenis

PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 auto
interface ethernet2 auto shutdown
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 intf2 security4
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
access-list compiled
pager lines 24
mtu outside 1500
mtu inside 1500
mtu intf2 1500
ip address outside dhcp setroute
ip address inside 192.168.1.1 255.255.255.0
no ip address intf2
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 192.168.1.0 255.255.255.0 0 0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.1.106 255.255.255.255 inside
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.100-192.168.1.150 inside
dhcpd dns 208.67.222.222
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
0
Comment
Question by:Mlenis11
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 16

Accepted Solution

by:
InteraX earned 2000 total points
ID: 39729702
Looking at the config, I would say that PDM should run, but I would check that it is installed on the filesystem.

type dir at the command line and look for a file starting with pdm.

You may also need to downgrade you version of java. The PDM is based on such old code now that you may need to go as low as 1.4 or 1.2 to get it working.

You could also look at using the command line to configure it or upgrade to one of the newer 5512X or 5515X firewalls. The PIX515s successor, the ASA 5510, is now discontinued.
0
 

Author Closing Comment

by:Mlenis11
ID: 39731569
Thank you.
0

Featured Post

Plesk WordPress Toolkit

Plesk's WordPress Toolkit allows server administrators, resellers and customers to manage their WordPress instances, enabling a variety of development workflows for WordPress admins of all skill levels, from beginners to pros.

See why 2/3 of Plesk servers use it.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
If you’re involved with your company’s wide area network (WAN), you’ve probably heard about SD-WANs. They’re the “boy wonder” of networking, ostensibly allowing companies to replace expensive MPLS lines with low-cost Internet access. But, are they …
Internet Business Fax to Email Made Easy - With  eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, f…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Suggested Courses

718 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question