Solved

Route certain ip ranges out a specific IP address

Posted on 2013-12-16
1
151 Views
Last Modified: 2014-01-09
I am configuring a new Cisco ASA 5505 with the security plus license. The customer has a block of ip's from the ISP, the subnet is  255.255.255.240. The client wants certain ranges within a certain subnet to route out using different IP's from the block. Say that 192.168.0-100 needs to be routed out IP 1.2.3.4; however, 192.168.101-200 needs to be routed out IP 1.2.3.5. The interface is setup as 1.2.3.4 255.255.255.240.
0
Comment
Question by:ITNC
1 Comment
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 39722968
Dynamic NAT. Define two pools and then set the ACL to translate one subnet to one pool and another subnet to the other pool.
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Suggested Solutions

Title # Comments Views Activity
External IP vs Internal IP 4 57
tplink repeater 3 27
pfSense IP Helper 4 92
Resource cost of NAT vs routing 3 29
There are times where you would like to have access to information that is only available from a different network. This network could be down the hall, or across country. If each of the network sites have access to the internet, you can create a ne…
Microservice architecture adoption brings many advantages, but can add intricacy. Selecting the right orchestration tool is most important for business specific needs.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

743 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now