Solved

PFSense - Equal Cost Multi-Path Routing with Carp

Posted on 2013-12-19
3
702 Views
Last Modified: 2014-03-26
We're trying to build some fail over into our new co-location facility.  I was asked questions by the Data Center that had me for a loss.

Currently we are using just one PFSense box with a single WAN connection.

In our new facility we are going to have 2 WAN connections.  I was asked if we were going to have devices capable of doing "Equal Cost Multi Path Routing"  Can the PFSense do this. while utilizing 2 routers?

My thought was to have the 2 internet connections come into 2 switches which then feed into the 2 PFSense machines.  With one /27 Network for us.  But we will have 2 gateways.

I have uploaded the copy of the Visio doc they sent me.  (IP addresses changed to protect the innocent)

Thanks!
Visio-colo-design.pdf
0
Comment
Question by:Daeta42
3 Comments
 
LVL 5

Accepted Solution

by:
piwowarc earned 500 total points
ID: 39801676
Hello

Pfsense supports Quagga so you can have OSPF and OpenBGP so you can have BGP routing. Both support implementing ECMP

I would fire up a VM and 2 GNS boxes to test it out though.

Regards
0

Featured Post

Network it in WD Red

There's an industry-leading WD Red drive for every compatible NAS system to help fulfill your data storage needs. With drives up to 8TB, WD Red offers a wide array of solutions for customers looking to build the biggest, best-performing NAS storage solution.  

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article offers some helpful and general tips for safe browsing and online shopping. It offers simple and manageable procedures that help to ensure the safety of one's personal information and the security of any devices.
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

26 Experts available now in Live!

Get 1:1 Help Now