Link to home
Start Free TrialLog in
Avatar of 1namyln
1namylnFlag for United States of America

asked on

Need a Heatsink and Fan Replacement for HP a6432f

This machine.

Because its proprietary I'm not sure what would fit.  The fan is crap and that's actually all I need but figured it wouldn't hurt to replace the heatsink also.  Thanks in advance.
ASKER CERTIFIED SOLUTION
Avatar of dbrunton
dbrunton
Flag of New Zealand image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
What is the problem with the current heatsink and fan?
Too much noise or the processor overheats?

As dbrunton said, for AM2+ there are a lot of coolers, but you should tell us what you're looking for and your budget to make a good recommendation. The case is a mid-size ATX so most coolers should fit in it.

HTH,
Dan
Avatar of 1namyln

ASKER

This one will fit perfectly.  Plenty of clearance.  Thank you.
Avatar of 1namyln

ASKER

Well I just realized that this fan has a four pin connector.  The fan I have is a 3 pin connector.  Is there a 4 pin to 3 pin converter?
See http://www.intel.com/support/motherboards/desktop/sb/cs-012074.htm

That implies that your fan should work on the board if you plug it in as the diagram shows but can't necessarily guarantee it.  If it does work it will be running at full speed.

There are 3 pin fans out there as well.  See http://www.amazon.com/Thermaltake-A4022-TR2-R1-Amd-Cooler/dp/B000KX65K6
Avatar of 1namyln

ASKER

Looks like its easier just to purchase the one you listed.  Going to go that route.  Thanks for your help.