Solved

Certificate assignment in Lync 2013

Posted on 2013-12-27
5
2,550 Views
1 Endorsement
Last Modified: 2013-12-31
I purchased an external certificate for Lync 2013 and was able to  assign it to the Default certificate, but when i went to assign it to OAuthTokenIssuer it gave me the following error.

Command execution failed: The private key of the certificate is not marked exportable and cannot be stored in the central management store.
1
Comment
Question by:victordr
  • 4
5 Comments
 
LVL 29

Accepted Solution

by:
becraig earned 500 total points
ID: 39742494
You need to be sure when you installed the certificate you marked the private key as exportable.

The computer you generate the original request from, simply go back to the computer and re-export the certificate as .pfx (be sure to check the box [Export Private Key])

Reinstall the certificate on the server as pfx - be sure to mark private key as exportable and that should be it.


Navigating the store:
mmc.exe from run -
Add Snap-in Certificates
Local computer
Navigate to personal.
0
 

Author Comment

by:victordr
ID: 39742504
So i need to create a separate request for the OAuthTokenIssuer?

I am using digicert and not an internal CA.
0
 

Author Comment

by:victordr
ID: 39742519
when i go to export it, the option "Yes, export the private key" is greyed out.
0
 

Author Comment

by:victordr
ID: 39742591
i was able to rekey the cert and it worked.
0
 

Author Comment

by:victordr
ID: 39749275
I've requested that this question be closed as follows:

Accepted answer: 500 points for becraig's comment #a39742494
Assisted answer: 0 points for victordr's comment #a39742591

for the following reason:

I was able to re-key the cert.
0

Featured Post

Does Powershell have you tied up in knots?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

My GPO's made for 2008 R2 servers were not allowing me to RDP into a new 2012 server by default.  That’s why I tried to allow RDP via Powershell, because I could log into a remote shell without further configuration. Below I will describe how I wen…
What to do when Windows Update is not working correctly? What tools can I use to detect the cause of the malfunction problem? What does this numeric error code mean? These and other questions that you have been asking in the past are answered here (…
In this Micro Tutorial viewers will learn how to use Boot Corrector from Paragon Rescue Kit Free to identify and fix the boot problems of Windows 7/8/2012R2 etc. As an example is used Windows 2012R2 which lost its active partition flag (often happen…
This tutorial will walk an individual through the process of configuring their Windows Server 2012 domain controller to synchronize its time with a trusted, external resource. Use Google, Bing, or other preferred search engine to locate trusted NTP …

831 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question