Solved

Guest Internet

Posted on 2013-12-29
8
254 Views
Last Modified: 2014-01-28
GIS-R3, is there a way to browse the device like a hard drive?  

Thanks!
0
Comment
Question by:Jack_son_
  • 4
  • 4
8 Comments
 
LVL 10

Assisted Solution

by:Korbus
Korbus earned 500 total points
ID: 39744990
Just looked it up, looks like a pure networking device, without storage capabilities to me.  I suspect you could connect to a NAS device THROUGH it, if you want network storage.
0
 

Author Comment

by:Jack_son_
ID: 39745014
ok, i was trying to just see if the files we uploaded were still on it, like the login, etc.  Do you think there is a way to check?
0
 
LVL 10

Assisted Solution

by:Korbus
Korbus earned 500 total points
ID: 39745023
I haven't looked this up to confirm, but network dvices like that usually have a web page that you can logon to.  This is generally how network devices are configured.

You will need to know the device IP address, and punch tht into your computer browser.  You will be prompted for a UN/PW.

Once logged in your should be able to see everything about it, including updates and current version.
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 

Author Comment

by:Jack_son_
ID: 39745027
okay, thanks; now i am trying to get the webpage we uploaded before, looks like the device is in the initial setup
0
 
LVL 10

Expert Comment

by:Korbus
ID: 39745039
ok, so it's taking you through a setup wizard?  Let me know if you get stuck by any questions, I'll try to help.
0
 

Author Comment

by:Jack_son_
ID: 39745068
it is at the setup wizard, although I am trying to get the old webpage from the device, not sure how to get to that
0
 
LVL 10

Accepted Solution

by:
Korbus earned 500 total points
ID: 39745073
You may need to complete the setup wizard to see the regular config webpage, not sure.  Turning it off and back on might get it out of setup mode, but again- not sure.

Perhaps I misunderstand what you mean by "get the old webpage from the device": can you elaborate?
0
 

Author Comment

by:Jack_son_
ID: 39745086
yea, we had uploaded a custom page, so i  was hoping to get that page back
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Need WiFi? Often, there are perfectly good networks that don't have WiFi capability - and there's a need to add it.  - Perhaps you have an Ethernet port into a network but no WiFi nearby. - Perhaps you have a powerline extender and no WiFi at the…
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question