Solved

Visio 2010 - Need to find layer elements

Posted on 2013-12-30
3
388 Views
Last Modified: 2013-12-31
I have 3 elements listed in my "connectors" layer.  However I can't find them.  I made other layers "invisible" expecting to be able to find my "remaining" connector artifacts but i couldn't.  
How can I find these three elements resident in my "connectors" layer?
0
Comment
Question by:brothertruffle880
  • 2
3 Comments
 
LVL 30

Accepted Solution

by:
Scott Helmers earned 500 total points
ID: 39746137
Can you find them if you select by type? On the Home tab, click Select>Select by Type>Layers>Connector  That will select only the items on the Connector layer.

If they still aren't visible, try setting a layer color to make them look different: On the Home tab, click Layers>Layer Properties, add a check mark to the Color column for the Connector layer, and then pick a very bright color from the Layer color dropdown.
0
 

Author Comment

by:brothertruffle880
ID: 39748323
SCOTT you are a lifesaver!
Thanks.
0
 
LVL 30

Expert Comment

by:Scott Helmers
ID: 39748411
Glad to help, but I'm curious to know: which technique helped you find the missing links?
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Managing 24/7 IT Operations is a hands-on job and indeed a difficult one. Over the years I have found some simple tips and techniques to increase the efficiency of the overall operations. The core concept has always been on continuous improvement; a…
David Varnum recently wrote up his impressions of PRTG, based on a presentation by my colleague Christian at Tech Field Day at VMworld in Barcelona. Thanks David, for your detailed and honest evaluation!
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question