Go Premium for a chance to win a PS4. Enter to Win

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 231
  • Last Modified:

QOS NEXUS 5548

What is the meaning of the command

#policy-map type qos gold
#match HIGH PRI
#SET qos-group 5

Does the "qos-group" command reference a queue within a port...in this case queue 5?
0
sectel
Asked:
sectel
1 Solution
 
Jordan MedlenCommented:
There are up to 6 system classes, two of which are on by default. These are mapped via the syntax "qos-group N". The "drop system class", specified by qos-group 0, takes unicast and multicast ethernet traffic into the drop system class. The FCoE (fiber channel over ethernet) system class is qos-group 1. The remaining classes are administrator defined. So you would define your type of class and then match it to your qos-group number, which would be in your config above.

More on this can be reviewed at http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/qos/513_n1_1/b_cisco_nexus_5000_qos_config_gd_513_n1_1_chapter_011.html.
0

Featured Post

 The Evil-ution of Network Security Threats

What are the hacks that forever changed the security industry? To answer that question, we created an exciting new eBook that takes you on a trip through hacking history. It explores the top hacks from the 80s to 2010s, why they mattered, and how the security industry responded.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now