Solved

NEXUS SPANNING TREE

Posted on 2014-01-02
1
208 Views
Last Modified: 2014-01-02
When employing two Nexus 7009 switches and using VPC so that both switches appear as a single logical switch at layer 2 to downstream neighbors...which switch acts as the Root.  Would you make one Switch Root for some Vlans and another Switch root for the remaining Vlan's?
0
Comment
Question by:sectel
1 Comment
 
LVL 6

Accepted Solution

by:
Jordan Medlen earned 500 total points
ID: 39751519
That would be the logical way to do it and have some load-sharing if you're going to implement STP/RSTP. The other way would be to use multi-chassis etherchannels. Using multi-chassis etherchannels allows you to maintain a loop free topology, while utilizing all links, as there are no links in blocking or discarding mode.
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hi there, This article summarizes what you need if you are going to set up your home or small business Network Attached Storage (NAS) to be accessible from the internet. Of course there are configuration differences based on your NAS or router ma…
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
Although Jacob Bernoulli (1654-1705) has been credited as the creator of "Binomial Distribution Table", Gottfried Leibniz (1646-1716) did his dissertation on the subject in 1666; Leibniz you may recall is the co-inventor of "Calculus" and beat Isaac…

756 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question