Solved

Event 10016, DistributedCOM Error

Posted on 2014-01-02
4
2,913 Views
Last Modified: 2014-01-07
We have a windows 7 computer that is getting these errors every few seconds.  I did a SFC /scannow with nothing, I found something on Microsoft about putting the security settings on the COM+ but I didn't quite follow.  Thank you for any help.

Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          1/2/2014 12:19:14 PM
Event ID:      10016
Task Category: None
Level:         Error
Keywords:      Classic
User:          SYSTEM
Computer:      niagaracamera.amerilabtech.com
Description:
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{24FF4FDC-1D9F-4195-8C79-0DA39248FF48}
 and APPID
{B292921D-AF50-400C-9B75-0C57A7F29BA1}
 to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="49152">10016</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-02T18:19:14.000000000Z" />
    <EventRecordID>460322</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>niagaracamera.amerilabtech.com</Computer>
    <Security UserID="S-1-5-18" />
  </System>
  <EventData>
    <Data Name="param1">application-specific</Data>
    <Data Name="param2">Local</Data>
    <Data Name="param3">Launch</Data>
    <Data Name="param4">{24FF4FDC-1D9F-4195-8C79-0DA39248FF48}</Data>
    <Data Name="param5">{B292921D-AF50-400C-9B75-0C57A7F29BA1}</Data>
    <Data Name="param6">NT AUTHORITY</Data>
    <Data Name="param7">SYSTEM</Data>
    <Data Name="param8">S-1-5-18</Data>
    <Data Name="param9">LocalHost (Using LRPC)</Data>
  </EventData>
</Event>
0
Comment
Question by:Kent Fichtner
  • 3
4 Comments
 
LVL 17

Expert Comment

by:Kent Dyer
ID: 39752170
Is this a com component?  What about regsvr32 /u your.dll and then regsvr32 your.dll again?

If that does not do it, you may need to change registry permissions.
0
 
LVL 4

Author Comment

by:Kent Fichtner
ID: 39752237
I am not really sure what the exact issue is, all I have is this same error code over and over.  The computer is running our camera recording software.
0
 
LVL 4

Accepted Solution

by:
Kent Fichtner earned 0 total points
ID: 39752340
I researched it a bit more and I found the following

1. Open regedit
2. Navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\AppID\{B292921D-AF50-400c-9B75-0C57A7F29BA1}
3. Right click the {B292921D-AF50-400c-9B75-0C57A7F29BA1} folder and select "Permissions"
4. Click Advanced
5. Click the "Owner" tab
6. Change owner to the local "Administrators" group and click OK.
7. Grant the local "Administrators" group Full Control over the {B292921D-AF50-400c-9B75-0C57A7F29BA1} key and click OK.
8. Launch “Component Services” under Start -> Programs -> Administrative Tools
9. Navigate to Component Services -> Computers -> My Computer -> DCOM Config
10. Right-click the "NAP Agent Service" and select properties.
11. Click the security tab
12. Click the "Edit..." button under the "Launch and Activation Permissions"
13. Highlight the "SYSTEM" user. Grant the user "Local Launch" permission.
14. Click OK and exit out of Component Services and regedit.
1
 
LVL 4

Author Closing Comment

by:Kent Fichtner
ID: 39761653
This solved the issues, I was getting the error ever 30-40 seconds and it has now been 10 minutes and no errors.
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

New Windows 7 Installations take days for Windows-Updates to show up and install. This can easily be fixed. I have finally decided to write an article because this seems to get asked several times a day lately. This Article and the Links apply to…
OfficeMate Freezes on login or does not load after login credentials are input.
This Micro Tutorial will teach you how to the overview of Microsoft Security Essentials. This is a free anti-virus software that guards your PC against viruses, spyware, worms, and other malicious software. This will be demonstrated using Windows…
This Micro Tutorial will go in depth within Systems and Security in Windows 7 and will go into detail regarding Action Center, Windows Firewall, System, etc. This will be demonstrated using Windows 7 operating system.

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question