Solved

Sonicwall PTP VPN Issue

Posted on 2014-01-02
6
240 Views
Last Modified: 2014-01-15
I've created a point to point VPN between 2 locations. The tunnel is up and both firewalls seem correct. from location "A" i can ping devices at location "B".  From location "B" . I can can only ping the Lan port on the firewall. None of the other devices respond. I used RDP to connect to a PC on the network and can ping all devices including the VPN firewall. I know that all of the devices are on the same switch/ segment. I  just cant see them through the VPN. Help.
Thanks
0
Comment
Question by:markdouenias
  • 3
  • 2
6 Comments
 
LVL 17

Expert Comment

by:lruiz52
Comment Utility
Seems like the firewall at site A is blocking imcp. Check the acl policies, you may need to add imcp to the allow rule or create one.
0
 
LVL 24

Expert Comment

by:diverseit
Comment Utility
Hi markdouenias,

Make sure the appropriate Interfaces have checks next to Ping. Then make sure the appropriate Access Rules are not blocking Ping. You may want to add a rule explicitly for Ping just as a test to the Zone which you are trying to access. Also, check the client firewalls (Windows or otherwise)...by default ICMP is blocked on Windows machines.

Let me know how it goes!
0
 
LVL 24

Expert Comment

by:diverseit
Comment Utility
Any update on this?
0
Free Trending Threat Insights Every Day

Enhance your security with threat intelligence from the web. Get trending threat insights on hackers, exploits, and suspicious IP addresses delivered to your inbox with our free Cyber Daily.

 

Accepted Solution

by:
markdouenias earned 0 total points
Comment Utility
Thanks for the input. It was driving me crazy. There was another gateway on the same network and the phone vendor never changed to the new gateway. SO when I pinged the configuration was replying to the wrong gateway. Everything is working fine. Thanks again
0
 
LVL 24

Expert Comment

by:diverseit
Comment Utility
Terrific, I glad you got it resolved. Now just select the answer to close the question!
0
 

Author Closing Comment

by:markdouenias
Comment Utility
It just took some timme
0

Featured Post

What Should I Do With This Threat Intelligence?

Are you wondering if you actually need threat intelligence? The answer is yes. We explain the basics for creating useful threat intelligence.

Join & Write a Comment

Suggested Solutions

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
Hi All,  Recently I have installed and configured a Sonicwall NS220 in the network as a firewall and Internet access gateway. All was working fine until users started reporting that they cannot use the Cisco VPN client to connect to the customer'…
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.
This tutorial demonstrates a quick way of adding group price to multiple Magento products.

771 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now