JPDU4
asked on
Cisco 800W ISR
Hello Guys,
On a Cisco 800W, is there a way to load a configuration from the USB port to the AccessPoint. The Router is very straight forward, Copy USB Startup........ Since the AP is a service mod of the router it doesn't have a direct connection to the USB port.
How, or can you map the AP to the USB port?
On a Cisco 800W, is there a way to load a configuration from the USB port to the AccessPoint. The Router is very straight forward, Copy USB Startup........ Since the AP is a service mod of the router it doesn't have a direct connection to the USB port.
How, or can you map the AP to the USB port?
ASKER
I would, but unfortunately. Some bone head installed the Lightweight IOS on the AP, and I don't have a controller to connect it to. So, I really don't have many options, I was hoping to either TFTP the file to the Routers flash, or use the USB.
However I do not think I can access the routers flash, or usb from the AP.
However I do not think I can access the routers flash, or usb from the AP.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Link to Fix Provided
https://supportforums.cisco.com/docs/DOC-1759