?
Solved

Cisco Phone Registration

Posted on 2014-01-09
2
Medium Priority
?
860 Views
Last Modified: 2014-01-09
Where can you see the negotiation process of a Cisco phone registering to a call manager?  Would you do that through the RTMT tool?  Syslog?  Other?
0
Comment
Question by:amigan_99
2 Comments
 
LVL 20

Accepted Solution

by:
José Méndez earned 2000 total points
ID: 39768990
RTMT will do that for you. If you choose the option to apply device based traces, much of the information will be filtered so you can focus on the device in question:

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml

Then, if you choose to go under Real Time Trace, View Real Time option, you'll see the logs printed out with a few seconds of delay while your phone resets.

http://supportforums.cisco.com/docs/DOC-11588
0
 
LVL 1

Author Closing Comment

by:amigan_99
ID: 39769006
Great - thank you very much.
0

Featured Post

The 14th Annual Expert Award Winners

The results are in! Meet the top members of our 2017 Expert Awards. Congratulations to all who qualified!

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

As companies replace their old PBX phone systems with Unified IP Communications, many are finding out that legacy applications such as fax do not work well with VoIP. Fortunately, Cloud Faxing provides a cost-effective alternative that works over an…
In short, I will be giving a guide on how to install UNMS on a virtual machine in hyper-v and change the default port for security (you don’t need to have a server, since Windows 10 supports hyper-v)
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

589 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question