Solved

Remote Access Windows VPN to Server 2008R2 No network access

Posted on 2014-01-10
6
510 Views
Last Modified: 2014-01-18
We have a Server 2008R2 box which is a single server environment. Its a DC and routing & remote access server. I setup vpn access a while ago and everything was working fine. I restarted the remote access service a while ago to see if it was causing interference with another service the server is doing. Ever since that restart of the routing and remote access service the VPN will connect but we are unable to access any resources over the VPN.

I've checked the routing table and there is an entry for the VPN subnet and have also tried ticking and unticking use remote default gateway. The VPN connection gets a client ip as well.

This is a single interface setup using dial in and NAT.

Any help would be really appreciated.
0
Comment
Question by:YorkData
  • 4
6 Comments
 
LVL 1

Expert Comment

by:Jobgeor
ID: 39771310
1. Uninstall your Cisco VPN Client.
2. Download and Install the file WinFix ftp://files.citrix.com/winfix.exe 
3. Reboot the computer.
4. Install the DNE Update

ftp://files.citrix.com/dneupdate.msi for 32-bit
ftp://files.citrix.com/dneupdate64.msi for 64-bit
5. Install your Cisco VPN Client

6. Restart Computer
0
 

Author Comment

by:YorkData
ID: 39771472
Sorry we are using routing and remote access on the Windows Server and the Windows VPN client. theres no Cisco equipment / software involved.

Thanks
0
 
LVL 12

Expert Comment

by:ktaczala
ID: 39772935
Check these settings, See attachment
ScreenCapture.jpg
0
VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

 

Author Comment

by:YorkData
ID: 39775942
I've checked the settings, it was set to LAN and demand dial routing but when I have changed it we are still unable to access any equipment on the remote network.

Thanks.
0
 

Accepted Solution

by:
YorkData earned 0 total points
ID: 39776661
I should have tried this before now but uninstalling and reinstalling the routing and remote access role fixed this.

Thanks for your help.
0
 

Author Closing Comment

by:YorkData
ID: 39790450
no other suggestions were made.
0

Featured Post

Is Your AD Toolbox Looking More Like a Toybox?

Managing Active Directory can get complicated.  Often, the native tools for managing AD are just not up to the task.  The largest Active Directory installations in the world have relied on one tool to manage their day-to-day administration tasks: Hyena. Start your trial today.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

OpenVPN is a great open source VPN server that is capable of providing quick and easy VPN access to your network on the cheap.  By default the software is configured to allow open access to your network.  But what if you want to restrict users to on…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
To efficiently enable the rotation of USB drives for backups, storage pools need to be created. This way no matter which USB drive is installed, the backups will successfully write without any administrative intervention. Multiple USB devices need t…
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…

825 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question