ISDN to analogue conversation ā€“ using ISDN phone with hosted PBX / Voip

We have a company director who likes using a particular phone (Habimat X2). He moved office where at their previous office they had a PBX system. Their new office is a cloud hosted PBX system.

On move preparation, we investigated the Habimat X2 and was told that by using a Cisco 112 ATA adaptor (analogue to phone adaptor) it would work,

However on installation we have learnt that because the device is the ISDN version of the Habimat it will not work with the adaptor we have.

Is there an equivalent device for an ISDN phone? Therefore, we want to be able to use this ISDN Habimat phone with a hosted PBX system.
Iā€™m really hoping this can be done.

Thanks in advance.
Who is Participating?
afflik1923Connect With a Mentor Author Commented:
In the end Habimat sold a card which converted the unit from ISDN to manual. I was able to install the card myself and saved shipping fees to switerland.
Thanks for input
Check out this adapter - converts IP to ISDN-BRI for the use with an ISDN based phone with SIP based hosted systems or carriers.
Jon GiesePresidentCommented:
I would make sure this setup will support all the hosted PBX features like hold and transfer.
afflik1923Author Commented:
I solved myself.
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.