Solved

Copying Brocade Fiber Switch config to newer switch

Posted on 2014-01-13
3
358 Views
Last Modified: 2014-02-11
hello All,

I have a Old DB4100B brocade switch that i would like to replace with a DB300B. Is it possible to copy the config from the 4100b to the 300B switch?
0
Comment
Question by:Jimbo0215
  • 2
3 Comments
 
LVL 62

Accepted Solution

by:
gheist earned 500 total points
ID: 39777305
Since most configuration is per physical port you copy it piece by piece as you connect cables over...
0
 

Author Comment

by:Jimbo0215
ID: 39777870
Is there a KB on how to do that?
0
 
LVL 62

Expert Comment

by:gheist
ID: 39780375
Like go to web interface, make a config backup and load resulting file in other web interface?
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Every server (virtual or physical) needs a console: and the console can be provided through hardware directly connected, software for remote connections, local connections, through a KVM, etc. This document explains the different types of consol…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question