Garry Shape
asked on
Auto Deployment of Updates not working on my machine
I setup a device collection to include my own workstation...it shows up there just fine.
Then I created an Automatic Deployment Rule in the Software Library workspace to download and deploy specific types of update classifications to that collection.
The "Downloaded" and "Deployed" columns for the MS updates say "Yes" to the target collection I specified.
However, when I go into the Monitoring workspace, Deployments, and select the auto ran deployment, there is nothing in "Compliant", "In Progress" or "Error".
Only in the "Unknown" tab do I see my workstation at the bottom where it says Category: "Client check passed/Active"
I've tried to Run the deployment over and over and keep running the Actions on my machine from the Config Manager Properties in control panel, but nothing seems to just "go" or "do", there's no action taking place.
What else can I try here? Is there possibly yet another pre-requisite I missed with this application?
Then I created an Automatic Deployment Rule in the Software Library workspace to download and deploy specific types of update classifications to that collection.
The "Downloaded" and "Deployed" columns for the MS updates say "Yes" to the target collection I specified.
However, when I go into the Monitoring workspace, Deployments, and select the auto ran deployment, there is nothing in "Compliant", "In Progress" or "Error".
Only in the "Unknown" tab do I see my workstation at the bottom where it says Category: "Client check passed/Active"
I've tried to Run the deployment over and over and keep running the Actions on my machine from the Config Manager Properties in control panel, but nothing seems to just "go" or "do", there's no action taking place.
What else can I try here? Is there possibly yet another pre-requisite I missed with this application?
ASKER
I got it to work on one system.
But on my system, I have the client installed, but SCCM shows it is not installed.
If I open Configuration Manager Properties from my control panel, the only actions I show are "Machine Policy Retrieval & Evaluation Cycle" and "User Policy Retrieval & Evaluation Cycle".
I've tried rebooting, uninstalling, re-installing, but no luck.
But on my system, I have the client installed, but SCCM shows it is not installed.
If I open Configuration Manager Properties from my control panel, the only actions I show are "Machine Policy Retrieval & Evaluation Cycle" and "User Policy Retrieval & Evaluation Cycle".
I've tried rebooting, uninstalling, re-installing, but no luck.
ASKER
I'm seeing this error in ccm.log:
Execute query exec [sp_CP_SetLastErrorCode] 2097152662, 120 SMS_CLIENT_CONFIG_MANAGER 1/21/2014 11:50:16 AM 361828 (0x58564)
Execute query exec [sp_CP_SetLastErrorCode] 2097152662, 120 SMS_CLIENT_CONFIG_MANAGER 1/21/2014 11:50:16 AM 361828 (0x58564)
I think there are a few Problems when you only have two Actions. Please check the Client logs LocationServices.log, ClientLocation.log, CCMExec.log and ClientIDManagerStartup.log for problems
ASKER
The problem was that the Use PKI certificates for Site Settings was checked
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
self resolved
have you executed a Software Update Scan on the Client?