Solved

Nic team windows 2012 server

Posted on 2014-01-16
7
902 Views
Last Modified: 2014-01-21
I have a del 2xserver with both 2x Ethernet NIC.

i configured first server
NIC1name:Domain     IP: 192.168.1.100
NIC2name:Heartbeat  IP:169.254.173.214, then testet PING all are OK. After i did NIC team ,Team1 IP configuration is emty comes out and no more Ping.
both ethernet cables connected the same switch.

What i forget?
Thanks
0
Comment
Question by:apollo-13
  • 4
  • 3
7 Comments
 
LVL 12

Accepted Solution

by:
Vaseem Mohammed earned 500 total points
ID: 39787826
As far as i know in NIC Team, you get a virtual network connection on which u have to set the IP Address and not on the NICs that you have teamed.
So in your case you will end up with 1 virtual Network, you configure it either for domain network or heartbeat.
You will need more 2 NIC to make another team to get one more network.
0
 

Author Comment

by:apollo-13
ID: 39787988
sorry i did not understand ,what you mean? can you please give me step guiede?
0
 
LVL 12

Assisted Solution

by:Vaseem Mohammed
Vaseem Mohammed earned 500 total points
ID: 39788134
0
Three Reasons Why Backup is Strategic

Backup is strategic to your business because your data is strategic to your business. Without backup, your business will fail. This white paper explains why it is vital for you to design and immediately execute a backup strategy to protect 100 percent of your data.

 

Author Comment

by:apollo-13
ID: 39788178
Hi  Wasim Shaikh
i used the same guiede ,but after 2xNIC teaming not any more Ping works.
0
 
LVL 12

Assisted Solution

by:Vaseem Mohammed
Vaseem Mohammed earned 500 total points
ID: 39788307
Did you configure the IP Address on virtual network?
0
 

Author Comment

by:apollo-13
ID: 39788408
I did .  I configured after NIC Teaming "Team1" IP.
0
 

Author Comment

by:apollo-13
ID: 39788416
you mean  IP Address on virtual network on this giuede HYPER_V TEAM. if yes i gave IP with default geteway and dns IPs.
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This article will review the basic installation and configuration for Windows Software Update Services (WSUS) in a Windows 2012 R2 environment.  WSUS is a Microsoft tool that allows administrators to manage and control updates to be approved and ins…
Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
In this Micro Tutorial viewers will learn how to restore single file or folder from Bare Metal backup image of their system. Tutorial shows how to restore files and folders from system backup. Often it is not needed to restore entire system when onl…
This tutorial will walk an individual through the process of configuring basic necessities in order to use the 2010 version of Data Protection Manager. These include storage, agents, and protection jobs. Launch Data Protection Manager from the deskt…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question