Solved

"Asterisk" "1.4.7.1" "register" "SIP" "VoIP"

Posted on 2014-01-20
3
481 Views
Last Modified: 2014-01-28
Im currently running an asterisk server (1.4.7.1) we use Linksys SPA942 & SPA962 handsets which are registered as SIP

last week (on Thursday) we had a power cut, since then phones seem to be struggling to register - its like the internet is dropping which causes Asterisk to hang

the server will display a load of "unreachable messages" one minute then i will get a load of messages like

peer 888 is now reachable (10ms / 2000ms)

Open in new window


i understand that Asterisk requires working DNS - i have tested this from the asterisk server which seems to be working (i can ping local/ domain machines aswell as external stuff)

anyone any ideas?

many thanks
0
Comment
Question by:mudcow007
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 21

Expert Comment

by:Mazdajai
ID: 39795530
How often the message show up? Since the server was built?

Can you post the log from /var/log/asterisk/messages? Is the Asterisk server and phones in the same subnet? Start Askterisk in verbose 'asterisk -vvvr¿' and post the output here .
0
 

Accepted Solution

by:
mudcow007 earned 0 total points
ID: 39802517
Hi thansk for the reply

the errors had only just started to appear since the power cut

its resolved itself now, which makes me think it was something to do with the ISP

thanks anyway
0
 

Author Closing Comment

by:mudcow007
ID: 39814505
issue resolved itself
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
cti route point to unity issue 2 56
winscp 000webhost.com 6 101
RHEL 6.7 Gnome Desktop on VMware 6 VM 9 114
Internal CA server 6 93
I. Introduction There's an interesting discussion going on now in an Experts Exchange Group — Attachments with no extension (http://www.experts-exchange.com/discussions/210281/Attachments-with-no-extension.html). This reminded me of questions tha…
It’s 2016. Password authentication should be dead — or at least close to dying. But, unfortunately, it has not traversed Quagga stage yet. Using password authentication is like laundering hotel guest linens with a washboard — it’s Passé.
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
How to Install VMware Tools in Red Hat Enterprise Linux 6.4 (RHEL 6.4) Step-by-Step Tutorial

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question