Solved

DNS not updating printers

Posted on 2014-01-20
1
212 Views
Last Modified: 2014-01-21
My new Server2012R2 Domain controllers and additional secondary servers are not picking up the printers for which a reservation has been assigned in DHCP.  DHCP is running on the PDC/DC with fail-over partner configured.

The zones on all DC with DNS show they are integrated with Active Directory.

Dynamic updates are set to secure only on the DC/DNS servers.
Do I need to change that to secure and nonsecure?  If yes, what is the impact in terms of security.  We are a small shop but have good size facility with about 150 devices connected.

I know that the printers are not active directory aware, but thought once the reservation was in DHCP on a PDC the gave it control over the ip.
Any ideas are much appreciated.
Thanks
0
Comment
Question by:kbettencourt
1 Comment
 
LVL 10

Accepted Solution

by:
WayneATaylor earned 300 total points
ID: 39795659
If you've set a reservation in DHCP for the printers and have the printers being assigned a DNS server addresses, as you have only secure dynamic updates , the address records won't be automatically created.

As you have set static addresses then I would suggest the easiest way is to set manual Address (A) records in the DNS servers.

Wayne
0

Featured Post

Highfive + Dolby Voice = No More Audio Complaints!

Poor audio quality is one of the top reasons people don’t use video conferencing. Get the crispest, clearest audio powered by Dolby Voice in every meeting. Highfive and Dolby Voice deliver the best video conferencing and audio experience for every meeting and every room.

Join & Write a Comment

Suggested Solutions

Recently, I was assigned the task of performing a hardware refresh in the datacenter. The previous Windows 2008 systems were connected to the SAN via fiber channel HBA’s and among other thing, had PowerPath installed in order to provide sufficient f…
OfficeMate Freezes on login or does not load after login credentials are input.
In this Micro Tutorial viewers will learn how to use Windows Server Backup to create full image of their system. Tutorial shows how to install Windows Server Backup Feature on Windows 2012R2 and how to configure scheduled Bare Metal Recovery backup.…
In this Micro Tutorial viewers will learn how they can get their files copied out from their unbootable system without need to use recovery services. As an example non-bootable Windows 2012R2 installation is used which has boot problems.

706 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now