<div>
Hi,<br />
<br />
Please see if the following article is of any help.<br />
<br />
<a href="http://www.puryear-it.com/blog/2013/02/20/how-to-forward-a-port-to-a-server-via-the-watchguard-firebox/" rel="ugc">http://www.puryear-it.com/blog/2013/02/20/how-to-forward-a-port-to-a-server-via-the-watchguard-firebox/</a>
</div>


Hi,

Please see if the following article is of any help.

http://www.puryear-it.com/blog/2013/02/20/how-to-forward-a-port-to-a-server-via-the-watchguard-firebox/ [http://www.puryear-it.com/blog/2013/02/20/how-to-forward-a-port-to-a-server-via-the-watchguard-firebox/]

<div>
This is for inbound forwarding. I'm looking for outbound forwarding.
</div>


This is for inbound forwarding. I'm looking for outbound forwarding.

<div>
For outbound or external mail relay, you will have to create a Send Connector. You could configure the WatchGuard device as the smarthost which will be relaying mails to internet. The following article outlines the procedure for creating a send connector in Exchange 2013.<br />
<br />
<a href="http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/" rel="ugc">http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/</a>
</div>


For outbound or external mail relay, you will have to create a Send Connector. You could configure the WatchGuard device as the smarthost which will be relaying mails to internet. The following article outlines the procedure for creating a send connector in Exchange 2013.

http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/ [http://exchangeserverpro.com/configuring-outbound-mail-flow-in-exchange-server-2013/]

<div>
This was exactly what I was searching for and for the reason I was using it for.
</div>


This was exactly what I was searching for and for the reason I was using it for.

<div>
<div class="content wysiwyg-content">
I am installing a new Exchange 2013 server for a customer and would like to force all outbound SMTP traffic through a different external IP. I've done this on a SonicWall, but not on a Watchguard. The Watchguard is a XTM21-W running v11.5.2 <br />
<br />
Thanks for any help you can give.
</div>
</div>


I am installing a new Exchange 2013 server for a customer and would like to force all outbound SMTP traffic through a different external IP. I've done this on a SonicWall, but not on a Watchguard. The Watchguard is a XTM21-W running v11.5.2 

Thanks for any help you can give.

Send SMTP traffic through different IP

Exchange is the server side of a collaborative application product that is part of the Microsoft Server infrastructure. Exchange's major features include email, calendaring, contacts and tasks, support for mobile and web-based access to information, and support for data storage.

Exchange

Hardware-based firewalls provide more sophisticated protection for inbound and outbound traffic than the simple Windows software firewall or the basic NAT firewalls found in routers. These devices implement techniques such as stateful packet inspection, deep packet inspection, and content filtering; and may include built-in antivirus and anti-malware protection.