?
Solved

QinQ on Cisco small business 300

Posted on 2014-01-21
3
Medium Priority
?
1,206 Views
Last Modified: 2014-01-23
I'm trying to set QinQ using a pair of cisco small business 300. Our ISP required the tag 2001, I  would like to send both our internal vlan 110 and 120.

When I put an interface in customer mode, I can set the vlan of the ISP, but how do I set which vlan will encapsulated ?
0
Comment
Question by:Sheldon1
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 26

Expert Comment

by:Soulja
ID: 39800094
Usually with QinQ setups. The only thing that the customer needs to do is set up a trunk to the ISP switch. The ISP handles putting the additional VLAN tag over your tag.

That said, just set up a normal 802.1q trunk between your switch and the ISP switch.

Are they asking that your switches initiate the tunneling?
0
 

Author Comment

by:Sheldon1
ID: 39801196
I was looking at it upside down. The port set as "customer mode" should be in our original network and the trunk port will to to our ISP switch.  I did some wireshark traces and it's OK now.

However I don't seem to be able to manage the switch in the production setup. The switch do not allow to put an ip address on either the QinQ port or on the customer mode vlan. I need to manage the switch using the console port only,

any idea for the management ?
0
 
LVL 26

Accepted Solution

by:
Soulja earned 1500 total points
ID: 39801486
You should have either a vlan interface for vlan 110 or 120. Which is your managment vlan? The switxh may still be using the default vlan 1 for management which would be the problem since you are not using vlan 1.
0

Featured Post

New feature and membership benefit!

New feature! Upgrade and increase expert visibility of your issues with Priority Questions.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

 One of the main issues with network wires is that you never have enough.  You run plenty and plan for the worst case but you still end up needing more.  What many people do not realize is with 10BaseT and 100BaseT (but not 1000BaseT) networks you …
When posting a question about a Cisco ASA, Cisco Router or Cisco Switch, it can aid diagnosis if a suitably sanitised copy of the config is provided. It is much better to leave as much of the configuration as original as possible, as it could be tha…
Do you want to know how to make a graph with Microsoft Access? First, create a query with the data for the chart. Then make a blank form and add a chart control. This video also shows how to change what data is displayed on the graph as well as form…
In this video, Percona Solution Engineer Dimitri Vanoverbeke discusses why you want to use at least three nodes in a database cluster. To discuss how Percona Consulting can help with your design and architecture needs for your database and infras…
Suggested Courses
Course of the Month8 days, 10 hours left to enroll

764 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question