Solved

Hyperv Failovercluster Folder Test Network

Posted on 2014-01-21
1
370 Views
Last Modified: 2014-01-27
I did a test network and I have 2x Windows 2012  Server and i installed failover . I have also One more Server file server installed . I have no iscsi or San Storage. I plan to use my file Server like San Storage. I plan to use ofcourse live Migration too.
Hyper v 1-172.16.100.10(win2012)
Hyper v 2 - 172.16.100.20(Win 2012)
File Server - 172.16.100.30(Win 2012) 2x500 Gb Drive

i am very New in hyperv. My Problem is Sharing creating properly for hyper v Servers
Can some One help me to configure my file Server properly for hyper v Servers ? Step by Step guiede for learning please.

Thanks  for your help
0
Comment
Question by:apollo-13
1 Comment
 
LVL 25

Accepted Solution

by:
Zephyr ICT earned 500 total points
ID: 39799196
So you want to use SMB to host your VM's on since you don't have any SAN or other shared storage device, no problem...

Technet provides step-by-step guides to implement this... It talks about both File Server clusters as well as standalone File Servers: http://technet.microsoft.com/en-us/library/jj134187.aspx

How to assign SMB3.0 file shares to Hyper-V, this might be all you need: http://technet.microsoft.com/en-us/library/jj614620.aspx

Information on Hyper-V and SMB, sample configs: http://blogs.technet.com/b/josebda/archive/2013/01/26/hyper-v-over-smb-sample-configurations.aspx
0

Featured Post

6 Surprising Benefits of Threat Intelligence

All sorts of threat intelligence is available on the web. Intelligence you can learn from, and use to anticipate and prepare for future attacks.

Join & Write a Comment

#Citrix #XenApp #Citrix Scout #Citrix Insight Services #Microsoft VMMAP #Microsoft ADEXPLORE #Microsoft RAMMAP #Microsoft TCPVIEW #Microsoft AUTORUNS #Microsoft PROCESS EXPLORER #Microsoft PROCESS MONITOR
It Is not possible to enable LLDP in vSwitch(at least is not supported by VMware), so in this article we will enable this, and also go trough how to enabled CDP and how to get this information in vSwitches and also in vDS.
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…

705 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now