Solved

Configure VPN site on Safe@Office 500

Posted on 2014-01-22
2
574 Views
Last Modified: 2014-01-29
Hello,

I have Safe@office 500 router  and I want to connect to the network from outside via VPN.
I created users with access and I download the client on the machine that I want to connect.
I 'm tried to create site but I think the configuration is not good.
I need help with configuration.


Thanks,
Dvir
0
Comment
Question by:compx_it
  • 2
2 Comments
 
LVL 10

Accepted Solution

by:
WayneATaylor earned 500 total points
ID: 39812403
With the Safe@Office firewalls you do have to make sure that you are using the right client as the different client versions are needed for different versions of the firewall and firmware versions.

You then do have to make sure you have the correct firewall rules setup etc

You can refer to the p[age here http://www.checkpoint.com/smb/help/safeatoffice/8.0/369.htm
for some more info.

Wayne
0
 
LVL 10

Expert Comment

by:WayneATaylor
ID: 39812406
Its also possible to use the normal Windows L2TP client which makes connecting etc much easier!

Wayne
0

Featured Post

Zoho SalesIQ

Hassle-free live chat software re-imagined for business growth. 2 users, always free.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Can't access DMZ from internal network 7 57
Which the best UTM recommended ? 2 69
Move configuration from Cisco 3560 to 3750X 6 42
SSH over http/https 8 104
Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

919 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now