Solved

Disable SCOM Monitors

Posted on 2014-01-23
4
1,698 Views
1 Endorsement
Last Modified: 2014-01-27
There are some alerts in SCOM that I do not need to appear again, as they are not important.
I want to disable that type of alerts.
What I have done, is right-clicking on the alert click open Health explorer and dig down to the error, right click on the error click Monitor then click Disable to disable all monitors of that class…
However even after doing that, and reset health, the same errors keep coming back.

Any help on fixing this issue will be very much appreciated.

Thanks
1
Comment
Question by:jskfan
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 30

Assisted Solution

by:Rich Weissler
Rich Weissler earned 500 total points
ID: 39803922
jskfan, I would have though that would have worked.  I've personally never disabled a monitor or rule directly from the right-click menu.  (First, I have this nasty fear that it would put an override in my default management pack.  *shiver*)

In my SCOM 2007 R2 environment, I usually configure an override though, and specify the override for the class or for specific object, and in the override menu, most monitors or rules have a specific value for 'enabled', in which I can disable the item.  (And importantly, I can specify exactly which management pack into which it should store the override.)  

Try that and see if it the alerts stop triggering?
0
 

Author Comment

by:jskfan
ID: 39808090
So to disable a monitor , I need to check the "Enable" checkbox and under "Override Value", should I put True(which is the default) or do I need to change it to False ?
0
 
LVL 30

Accepted Solution

by:
Rich Weissler earned 500 total points
ID: 39808680
Yes, changing the 'Enable' value to 'False' is how I'd usually do it.
(And it may be that the quick 'disable' you did before did exactly that.  But that's what I'd want to confirm happened in that case.)
0
 

Author Closing Comment

by:jskfan
ID: 39814113
Thank you
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
New Windows 7 Installations take days for Windows-Updates to show up and install. This can easily be fixed. I have finally decided to write an article because this seems to get asked several times a day lately. This Article and the Links apply to…
The viewer will learn how to use the =DISCRINV command to create a discrete random variable, use this command to model a set of probabilities and outcomes in a Monte Carlo simulation, and learn how to find the standard deviation of a set of probabil…
The viewer will learn how to create two correlated normally distributed random variables in Excel, use a normal distribution to simulate the return on different levels of investment in each of the two funds over a period of ten years, and, create a …

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question