Solved

How to separate a Video Camera from the rest of your network.

Posted on 2014-01-23
5
384 Views
Last Modified: 2014-01-24
How can I set up a video camera on a separate network from the rest of the LAN?
The Current LAN is 10.0.0.0/8.   Can I use a 192.168.0.0 subnet?  Would this type of set up require any ACL's?
0
Comment
Question by:Evolutionzz
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 51

Expert Comment

by:Netman66
ID: 39805463
If you use vLans, then you can use whatever IP subnet you want.  If you do inter-vlan routing then this may be a problem.

Why on earth do you have a subnet encompassing the entire 10.x.x.x range?  Seems crazy.
0
 

Author Comment

by:Evolutionzz
ID: 39805552
I only used 10.x.x.x as an example.  Of course we don't use the entire thing.  Just theoretical.

How can I tell if inter-vlan routing is enable for a specific vlan?
0
 
LVL 51

Assisted Solution

by:Netman66
Netman66 earned 500 total points
ID: 39806159
If routing is enabled on the core switch and there are no acls, then it should route. If using eigrp or ospf, then the network subnets of each vlan need to be included for routing to take place. A simple ping to other vlan members should tell you if they talk.
0
 

Author Comment

by:Evolutionzz
ID: 39806240
I actually don't want inter-vlan routing to occur,  I want to totally segment a device from the all other VLANs and make it accessible via port 80 from the outside world and allow FTP from the segmented device to the outside world.
0
 
LVL 51

Accepted Solution

by:
Netman66 earned 500 total points
ID: 39806415
Use acls on the vlan you create and if using a routing protocol (eigrp or ospf) don't include that network.
0

Featured Post

Free Tool: SSL Checker

Scans your site and returns information about your SSL implementation and certificate. Helpful for debugging and validating your SSL configuration.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
SSG50 Firewall Rules 17 45
Receiving wifi on an underground station 22 130
HP 2530 switch and routing 4 64
FTP through ASA 9.5 1 14
We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question