CISCO 5510 FIREWALL RDP ACCESS

Running ASDM asm 8.3

Need help to allow inbound rdp traffice from 192.168.0.x outside to 192.168.1.46 (server inside)

can some help with nat rule and acl pls

from a newbiE!
Jon345Asked:
Who is Participating?
 
rauenpcCommented:
object service SERVICE-RDP
service tcp destination eq 3389

access-list inbound extended permit object SERVICE-RDP any object HOST-10.1.1.1

object network HOST-10.1.1.1
host 10.1.1.1
nat (inside,outside) static interface service tcp 3389 3389



Replace IP's and ACL name as necessary, make sure the ACL is applied to the outside interface on the inbound direction. If you are not using the outside interface IP address for translation, just replace "interface" with the public IP address you'll be using.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.