Solved

verify if port is listening

Posted on 2014-01-24
1
522 Views
Last Modified: 2014-01-24
How can I verify if port 443 is really listening on a server? The firewall has an acl for incoming traffic allowing 443 to a specific server, but when I go to the server in IIS its being hosted on it shows port 80 only for that ip. Before I disable the rule I want to be truly sure that 443 is not listening on the server, how can I verfify? Going to https:// would not be an option. In the firewall this rule has very little hits which makes me unsure if it is being used (443), could the hits be that every time I go to https://url.com the hit increases so it is only me?

Thanks.
0
Comment
Question by:tolinrome
1 Comment
 
LVL 29

Accepted Solution

by:
becraig earned 500 total points
ID: 39807494
portqry

portqry -i -n server1 -e 443

http://www.microsoft.com/en-us/download/details.aspx?id=17148

This will tell you if the port is filtered or not, also you can use telnet:
telnet server1 443
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
For months I had no idea how to 'discover' the IP address of the other end of a link (without asking someone who knows), and it drove me batty. Think about it. You can't use Cisco Discovery Protocol (CDP) because it's not implemented on the ASAs.…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question