Solved

Cisco IP Routing

Posted on 2014-01-27
2
151 Views
Last Modified: 2014-02-17
Hello Experts,

I have a customer that wants us to provide him private IP address that can routed on the internet. I believe it can be achieved by NATTing but I'm not sure.

Can someone let me know if its possible?

Cheers

Carlton
0
Comment
Question by:cpatte7372
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 11

Accepted Solution

by:
Miftaul earned 500 total points
ID: 39813841
Mostly every one is using private block of ip internally. Do you mean, customer wants publicly routable ip.
Private ips are for internal use and cant be routed. For external access, they need to be translated using NAT.
0
 

Author Closing Comment

by:cpatte7372
ID: 39864154
Cheers
0

Featured Post

Supports up to 4K resolution!

The VS192 2-Port 4K DisplayPort Splitter is perfect for anyone who needs to send one source of DisplayPort high definition video to two or four DisplayPort displays. The VS192 can split and also expand DisplayPort audio/video signal on two or four DisplayPort monitors.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
Getting hacked is no longer a matter or "if you get hacked" — the 2016 cyber threat landscape is now titled "when you get hacked." When it happens — will you be proactive, or reactive?
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses
Course of the Month8 days, 3 hours left to enroll

617 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question