Solved

fiber termination

Posted on 2014-01-28
3
342 Views
Last Modified: 2014-02-12
May be you can educate me on this. I am trying to understand how the fiber provider deliver the fiber to a building. The provider in question is DQE. From my understanding, Verizon also gets involved. How does it all work?
I know that Verizon takes care of the last mile. So where is it all connected? Thanks
0
Comment
Question by:leblanc
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 7

Accepted Solution

by:
Ned Ramsay earned 500 total points
ID: 39816308
Your provider (DQE) purchase last mile from Verizon who turn up and drop their connection into your building at a specified location (wherever you guys tell them, usually a ground floor electrical/telephone room).

They then connect whatever network device they are passing it to (cisco router etc if requested) and from that device they run a patch cable to an ethernet socket. This is the dividing line, anything from that socket backwards is their responsibility.

You then plug your router/firewall/network device into the ethernet socket and thats it.
0
 
LVL 1

Author Comment

by:leblanc
ID: 39816518
"They then connect whatever network device they are passing it to": you meant from the verizon demarc to the DQE router; then from the DQE router to the ethernet socket; then to my firewall. it is all ethernet from the demarc to my fw. Correct?
0
 
LVL 7

Assisted Solution

by:Ned Ramsay
Ned Ramsay earned 500 total points
ID: 39816537
I dont know the specifics of DQE, in our case it was just a verizon line into "DQE" then a line out to the DMARK for us.

Ethernet handoff which we cabled up to our server room.
0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

751 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question