Solved

Verifying printer drivers are RDS compliant

Posted on 2014-01-29
4
250 Views
Last Modified: 2014-02-07
Is there a way to test if printer drivers are RDS compliant?

I have a system that reboots and although the drivers from the manufacturers state they are compliant I would like to test them.  I also have some drivers that I would like to load but am not sure if they will effect the system negatively.
0
Comment
Question by:tucktech
  • 2
  • 2
4 Comments
 
LVL 19

Expert Comment

by:Patricksr1972
ID: 39818825
Did you download the newest drivers?
Did the system reboot before installing these drivers?
What does event viewer say causing this reboots?
0
 

Author Comment

by:tucktech
ID: 39818973
I did download the newest drivers, the OS was corrupt and was rebooting so I wiped the os and reinstalled.  After serveral days it started rebooting randomly.  There is nothing in the event viewer that shows any correlation to rebooting, that I can see...

So back to the original question, is there a way to "verify" a driver?
0
 
LVL 19

Accepted Solution

by:
Patricksr1972 earned 400 total points
ID: 39818988
Cool, if that is all you need look at the MS driver identifier tool. Link
0
 

Author Closing Comment

by:tucktech
ID: 39842679
thanks for addressing the answer succinctly.
0

Featured Post

Top 6 Sources for Identifying Threat Actor TTPs

Understanding your enemy is essential. These six sources will help you identify the most popular threat actor tactics, techniques, and procedures (TTPs).

Join & Write a Comment

OfficeMate Freezes on login or does not load after login credentials are input.
A procedure for exporting installed hotfix details of remote computers using powershell
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…

706 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now