Solved

Can't ping servers, remote desktop into servers after connecting to internal network from home using cisco vpn client

Posted on 2014-01-30
8
1,056 Views
Last Modified: 2014-03-15
Can't ping servers, remote desktop into servers after connecting to internal network from home using cisco vpn client from only my PC. Other users are able to connect but not from my machine.

I unchecked and checked 'allow local LAN access' dint work.
Enable Transparent tunneling : IP Sec over UDP is checked.

No idea what has happened suddenly, it was working till y'day.
0
Comment
Question by:anuboggaram
  • 3
  • 2
  • 2
  • +1
8 Comments
 
LVL 28

Expert Comment

by:asavener
ID: 39820654
The old client, or Anyconnect?

My first guesses would be a) your ISP made a change that's blocking the traffic or b) an issue with MTU size.

Try from a different location, or try adjusting your MTU downward.
0
 
LVL 16

Expert Comment

by:gurutc
ID: 39820858
Also, how is your DNS set up?

run ipconfig /all in a command prompt when connected and not connected.

See any difference?

can you ping the IP addresses?

- gurutc
0
 
LVL 17

Expert Comment

by:MAG03
ID: 39827864
Is your VPN client successfully connecting to the VPN?  Is your PC recieving the correct IP address?

Could you post a full sanitised running configuration of your ASA please.
0
 
LVL 16

Expert Comment

by:gurutc
ID: 39829517
If you can provide the info requested by all the experts it will help greatly.

- gurutc
0
How to run any project with ease

Manage projects of all sizes how you want. Great for personal to-do lists, project milestones, team priorities and launch plans.
- Combine task lists, docs, spreadsheets, and chat in one
- View and edit from mobile/offline
- Cut down on emails

 
LVL 28

Expert Comment

by:asavener
ID: 39829775
Had a thought... did one of the subnets change so that now they overlap?
0
 

Accepted Solution

by:
anuboggaram earned 0 total points
ID: 39872596
Thanks for all expert's comment. I found solution.

I had to uninstall dongle software and install it again. It started working. Looks like there was some software upgrade which was blocking to connect to network.
0
 
LVL 16

Expert Comment

by:gurutc
ID: 39873083
Sweet!  Glad you are working.  

- gurutc
0
 

Author Closing Comment

by:anuboggaram
ID: 39931064
It was system or VPN issue. It was datacard software issue.
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Healthcare organizations in the United States must adhere to the guidance of both the HIPAA (Health Insurance Portability and Accountability Act) and HITECH (Health Information Technology for Economic and Clinical Health Act) for securing and protec…
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

757 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now