?
Solved

IMM, Remote Control

Posted on 2014-01-30
1
Medium Priority
?
680 Views
Last Modified: 2014-01-31
From the Integrated Management Module, once I am in the Remote Control, how do I load an ISO so that it can be loaded upon reboot ?

Thanks
0
Comment
Question by:Los Angeles1
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 21

Accepted Solution

by:
Mazdajai earned 2000 total points
ID: 39822486
Depends on the model, you should be to mount a iso with the remote console.

Tasks > Remote Control > Start Remote Control in Single User Mode

Once you have a remote session open, it should be under

Tools > Virtual Media > Add Image
0

Featured Post

Plug and play, no additional software required!

The ATEN UE3310 USB3.1 Gen1 Extender Cable allows users to extend the distance between the computer and USB devices up to 10 m (33 ft). The UE3310 is a high-quality, cost-effective solution for professional environments such as hospitals, factories and business facilities.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The 6120xp switches seem to have a bug when you create a fiber port channel when you have a UCS fabric interconnects talking to them.  If you follow the Cisco guide for the UCS, the FC Port channel will never come up and it will say that there are n…
INTRODUCTION The purpose of this document is to demonstrate the Installation and configuration, of the HP EVA 4400 SAN Storage. The name , IP and the WWN ID’s used here are not the real ones. ABOUT THE STORAGE For most of you reading this, you …
Learn how to find files with the shell using the find and locate commands. Use locate to find a needle in a haystack.: With locate, check if the file still exists.: Use find to get the actual location of the file.:
Connecting to an Amazon Linux EC2 Instance from Windows Using PuTTY.
Suggested Courses
Course of the Month12 days, 3 hours left to enroll

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question